$0 - $24.99

Products (Total Items: 324)
Sort by
Top-Rated Elite Adhesive Light Fixture Traps Flying Insects Kill Flies DEAD!!! This is the top-rated adhesive light trap for flying insects made in the USA. With 80 watts of Ultra Violet rays and over 210 square inches of surface coverage, this is the optimum in silent, non-chemical insect traps. The light can be mounted on the wall 3' to 6' above the floor or it can be used as a portable trap by being positioned on tabletops, counters, and/or shevles. Insects are trapped silently by two disposable adhesive panels. Great for restaurants and food stores for use in dining or food preparation areas. Leave it on after hours for continuous coverage. Additional adhesive panels (glue boards) are sold separately. Ultra Violet replacement bulbs are also sold separately - as needed. Call us toll-free at (888) 558-5575 for pricing and information. Features: White powder coated steel construction Continuous, non-chemical, silent trapping 80 watts of Ultra Violet rays to attract insects Dual adhesive panels for increased insect trapping coverage UL listed: 115v/60hz 6 foot long power cord Accepted under current FDA & USDA code 5 year limited warranty Measurements: 18"W x 10"H x 6"D Quantity discounts are available on purchases of 5 or more fixtures.
Ultra Thin Light Traps Flying Insects in Crowded Areas Kill Flies DEAD!!! This Slimline light trap is ultra thin. At only three inches deep, it mounts attractively on the wall to trap flying insects in your confined areas. With it's non-chemical, silent trapping the Slimline is great for trapping insects in kitchens, food preparation areas, hallways, and anywhere crowding is a concern. Hinged, easy access door allows quick and simple replacement of UV bulbs and disposable, adhesive panels. Black panel hides captured insects from view in sensitive areas. For best results, position fixture 3' to 6' above the floor. Features: Continuous, non-chemical, silent trapping White powder coated steel construction Dual adhesive panels for increased insect trapping coverage Covers areas up to 1,500 sq ft 50 watts of Ultra Violet rays to attract insects UL listed: 115v/60hz 6 foot long power cord FDA and USDA accepted under current code 5 year limited warranty Measurements: 19"W x 9.5"H x 3"D Please call us toll-free at (888) 558-5575 with any questions. Quantity discounts available on orders of five or more fixtures.
Decorative Sconce Light Traps Flying Insects. Kill flies DEAD!!! This stylish and functional light fixture mounts on the wall, and features a V-shaped wall sconce light with a hidden flying insect trap. Insects are trapped silently by a disposable adhesive panel located at the top of the light trap. Great for restaurants and food stores for use in dining and/or food preparation areas. Clean and compact, customers won't even notice it's a fly trap. Leave it on after hours for continuous coverage. Additional adhesive panels (glue boards) are sold separately. Ultra Violet replacement bulbs are also sold separately - as needed. Call our toll-free number for pricing and information. Features: Choice of gold vein or white finish Continuous, non-chemical, silent trapping Disposable adhesive panel measuring 4" x 16" 25 watts of Ultra Violet rays to attract insects Covers areas up to 900 square feet 115v/60hz 6 foot cord Accepted under FDA & USDA current code 5 year limited warranty Measures 24"L x 12.5"H x 5.5"D Please contact us toll-free at 888-558-5575 with any questions. Quantity discounts available on orders of five or more units.
The AG-970 Insect Electrocutor provides superior flying insect control for large indoor industrial and commercial buildings. The durable aluminum construction works well as a wall or recessed wall mount light trap. The vertical position of the NF-970, installed 1? to 2? above the floor, positions the 48? UV Insect Lights to attract flying insects where they are most active. Wall mount NF - 970 Features: - 24 Hour, non-chemical trapping - Aluminum construction - Covers 2,500 sq. ft. (50 lineal feet) - No glue board replacement cost - 80 watts of U.V. Insect Attraction - UL listed; 115v/60hz, with 6? cord - FDA & USDA accepted under current code 14"W x 57"H x 5.5"D 2 - 40W Insect lights
The AG-1002 Insect Electrocutor is designed for wall or corner mount positions inside buildings with flying insect problems. The angled rear design of the NF-1002 allows the light trap to fit into tight corner locations. When vertically mounted 1? to 2? above the floor, the 48? UV insect light shine just above the floor area where flying insects are most active. Corner Mount NF - 1002 Features: - 24 Hour, non-chemical trapping - Aluminumized Steel construction - Covers about 2,500 sq. ft. (50 lineal feet) - No glue board replacement cost - 80 watts of U.V. Insect Attraction - UL listed; 115v/60hz, with 6? cord - FDA & USDA accepted under current code 14"W x 57"H x 5.5"D 2-40W insect lights Easy service door design
The AG-963 Insect Electrocutor is designed for small areas where a vertical light trap is the best choice. This corner/wall mount light trap is great for hallways and interior rooms were fly control is important. The NF-963 has a removable catch tray to contain dead insects for later evaluation, identification, and disposal. Install 3? to 6? high on the wall. Decorative Wall Mount NF - 963 Features: - 24 Hour, non-chemical trapping - White powder coated steel construction - Covers about 1,800 sq. ft. (50 linear feet) - No glue board replacement cost - U.V. output increased to 80 watts of Insect Attraction - UL listed, 115v/60hz, with 6? cord - FDA & USDA accepted under current code 12"W x 27"H x 5.5"D 2 - 32W Insect lights Easy service door design
The AG-969 Insect Electrocutor is the top rated wall mount light trap with 120 watts of UV light attraction. Flying insects are electrocuted on an internal grid and then dropped into a removable capture tray. The removable drawer allows easy access for evaluation, identification, and disposal of flying insects. The NF-969 is ideal for aggressive control in sensitive areas. USDA studies show the 120 watts of UV light output provides the optimum fly attraction. Install 3? to 6? high on wall. Wall Mount NF - 969 Features: - 24 Hour, non-chemical trapping - Aluminum construction never rusts - Covers about 3,500 sq. ft (70 lineal feet) - No glue board replacement cost - U.V. output increased to 120 watts of Insect Attraction - UL listed, 115v/60hz, with 6? cord - FDA & USDA accepted under current code 19.25"W x 30"H x 5.75"D 3 - 32W Insect lights Easy service door design
The AG-241 Insect Electrocutor is useful as both a wall mount design and a ceiling suspended light trap. Shipping dock walls, warehouse ceilings, and hallway corridor ceilings are some of the locations where the NF-241 is trapping flying insects. The removable drawer allows easy access to evaluate, identify, and dispose of trapped insects. Ceiling Suspended NF - 241 Features: - 24 Hour, non-chemical trapping - Aluminum construction - Covers about 3,500 sq. ft. (70 lineal feet) - No glue board replacement cost - 80 watts of U.V. Insect Attraction - UL listed; 115v/60hz, with 6? cord - FDA & USDA accepted under current code 55"W x 13.5"H x 6.5"D 2-40W Insect lights Easy service door design
The AG-961 Insect Electrocutor is a compact yet powerful Light Trap for small areas where space is limited. Its 80 watts of UV light attraction is the highest available in a trap of this size. It is open on both sides for 360-degree visibility and kills insects on a protected electric grid. Dead insects are contained in a removable drawer. The light is suspended from the ceiling, mounted 3? to 6? high on a wall, or used as a portable tabletop trap. Ceiling Suspended NF - 961 Features: - 24 Hour, non-chemical trapping - Aluminum construction never rusts - Covers 2,500 sq. ft. (50 lineal feet) - No glue board replacement cost - U.V. output increased to 80 watts of Insect Attraction - UL listed; 115v/60hz, with 6? cord - FDA & USDA accepted under current code 26"W x 14"H x 5.5"D 2-32W Insect lights Easy service door design
The AG-661 Insect Electrocutor is the premier outdoor flying insect light trap. This unit has heavy duty construction and large attraction range for aggressive flying insect control. It can be suspended by wall or post brackets away from buildings to suppress insect populations around boat docks, parking lots, or stadiums before they enter the area or building. Suspended/Outdoor Use NF - 661 Features: - No chemicals - Heavy-duty aluminum construction never rusts - Covers about 20,000 cu. ft. (200 lineal feet) - Low annual maintenance - 80 watts of U.V. Insect Attraction - 115v/60hz, with 6? grounded cord 56"W x 20.5"H x 6.75"D 2-40W Insect lights
Night Shades are Insulated to keep temperatures under control and save electricity
White replacement adhesive boards for model WS EL-60 Product comes in pack of 10
This product comes in a pair and is 15 Watt For use in: WS-85, GT-150, 180
More results: Previous Page 1 2 3 4 5 ...21 Next Page